Dell Inspiron 620s Setup Guide - Page 29
Solving Problems, Beep Codes - bios
View all Dell Inspiron 620s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Solving Problems This section provides troubleshooting information for your computer. If you cannot solve your problem using the following guidelines, see "Using Support Tools" on page 34 or "Contacting Dell" on page 57. WARNING: Only trained service personnel should remove the computer cover. See the Service Manual at support.dell.com/manuals for advanced service instructions. Beep Codes Your computer might emit a series of beeps during start-up if there are errors or problems. This series of beeps, called a beep code, identifies a problem. If this occurs, write down the beep code and contact Dell (see "Contacting Dell" on page 57) for assistance. NOTE: To replace parts, see the Service Manual at support.dell.com/manuals. Beep Code One Two Three Four Five Six Seven Possible Problem Possible system board failure - BIOS ROM checksum failure No RAM detected NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly. Possible system board failure - Chipset error RAM read/write failure Real Time Clock failure Video card or chip failure Processor failure 27 INSPIRON