Dell Inspiron 7790 AIO Inspiron 27-7790 Service Manual - Page 19
System-board shield, Removing the system-board shield
View all Dell Inspiron 7790 AIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Steps 1. Align the screw holes on the hard drive with the screw holes on the hard-drive bracket. 2. Replace the four screws (M3x3.5) that secure the hard-drive bracket to the hard drive. 3. Slide the hard-drive assembly into the slot on the display-assembly base. 4. Replace the two screws (M3x5) that secures the hard-drive assembly to the display-assembly base. Next steps 1. Install the stand. 2. Install the bottom cover. 3. Install the back cover. 4. Follow the procedure in After working inside your computer. System-board shield Removing the system-board shield Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the back cover. 3. Remove the bottom cover. 4. Remove the stand. About this task The following image indicates the location of the system-board shield and provides a visual representation of the removal procedure. Removing and installing components 19