Dell Inspiron Mini 10v N Service Manual - Page 14

Coin-Cell Battery

Page 14 highlights

Back to Contents Page Coin-Cell Battery Dell™ Inspiron™ 1011 Service Manual Removing the Coin-Cell Battery Replacing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer. Removing the Coin-Cell Battery 1. Follow the instructions in Before You Begin. 2. Follow the instructions from step 2 to step 10 in Removing the System Board. 1 coin-cell battery 2 coin-cell battery cable connector 3. Disconnect the coin-cell battery cable from the system board connector. 4. Lift the coin-cell battery off the computer base. Replacing the Coin-Cell Battery 1. Replace the coin-cell battery. 2. Connect the coin-cell battery cable to the system board connector. 3. Follow the instructions from step 3 to step 11 in Replacing the System Board. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

Back to Contents Page
Coin-Cell Battery
Dell™ Inspiron™ 1011 Service Manual
Removing the Coin
-
Cell Battery
Replacing the Coin
-
Cell Battery
Removing the Coin-Cell Battery
1.
Follow the instructions in
Before You Begin
.
2.
Follow the instructions from
step 2
to
step 10
in
Removing the System Board
.
3.
Disconnect the coin-cell battery cable from the system board connector.
4.
Lift the coin-cell battery off the computer base.
Replacing the Coin-Cell Battery
1.
Replace the coin-cell battery.
2.
Connect the coin-cell battery cable to the system board connector.
3.
Follow the instructions from
step 3
to
step 11
in
Replacing the System Board
.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
coin-cell battery
2
coin-cell battery cable connector