Dell Latitude 2100 Dell™ Mobile Computing Station - Page 7

ENGLISH Ergonomics and Safety Alerts ELECTRICAL: To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other potentially corrosive liquids or substances. ELECTRICAL: Do not immerse Mobile Computing Station or Mobile Computing Station components in liquid or allow liquids to flow into the Mobile Computing Station. Wipe all cleaners off surface immediately using a damp cloth. Thoroughly dry surface after cleaning. ELECTRICAL: Do not use flammable cleaners on Mobile Computing Station surfaces due to close proximity of electrical power and equipment. CAUTION: Adjustment, Service, Replacement - DO NOT attempt to adjust, service or replace any part of the Mobile Computing Station unless directed to do so through Ergotron-approved documentation (i.e. installation instructions). Only Ergotron, Inc. or an Ergotron-certified entity may adjust, service or replace Mobile Computing Station components. If any component on the Mobile Computing Station is missing or damaged, the Mobile Computing Station must not be used, contact Ergotron immediately to request a replacement part. CAUTION: Casters - Check casters periodically to make sure they are clean and free of debris that would prevent smooth travel. Avoid moving Mobile Computing Station across uneven, dirty or damaged surfaces. CAUTION: Customer Equipment- Make sure equipment is balanced and mounted securely to Mobile Computing Station. Contact Ergotron for information about moving Mobile Computing Station components. CAUTION: Mobile Computing Station must be periodically inspected by an adult for damage, and any broken parts replaced as necessary. If a child notices any broken or damaged parts, this should be reported to an adult so that the damaged parts can be replaced. NOTE: Cables - Keep cables neatly organized on the Mobile Computing Station (a variety of solutions are provided with your Mobile Computing Station for this purpose). Excess cables should be routed away from moving components with cable clips. Contact Ergotron for more information. Power Cords and Equipment Cables There are specific risks associated with the use of equipment having power cords. It is particularly important to be aware and avoid these risks when the Mobile Computing Station is located in close proximity to children. Failure to observe the following safety notices can result in fire or death by electric shock. ELECTRICAL: Always disconnect Mobile Computing Station power cord from wall outlet before opening lower compartment. Do not allow children to open lower compartment. CAUTION: Double Pole / Neutral Fusing. ELECTRICAL: Ethernet port not suitable for connection to circuits used outside the building and subject to lightening or power faults. ELECTRICAL: Inspect cord thoroughly before each use. DO NOT USE IF DAMAGED. ELECTRICAL: Do not plug more than specified number of watts into power system. ELECTRICAL: Do not run cord through doorways, holes in ceilings, walls or floors. ELECTRICAL: Insert plug completely into outlet. ELECTRICAL: Do not remove, bend or modify any metal prongs or pins of cord. ELECTRICAL: Do not substitute supplied AC Adapters. ELECTRICAL: Do not use excessive force to make connections. ELECTRICAL: Keep away from water. DO NOT USE WHEN WET. ELECTRICAL: Keep children away from cord. ELECTRICAL: Keep children away from internal Mobile Computing Station components. ELECTRICAL: Do not plug cord into an extension cord. ELECTRICAL: Avoid overheating. Uncoil cord and do not cover it with any material. ELECTRICAL: Do not drive, drag or place objects over cord. Do not walk on cord. ELECTRICAL: Grasp plug to remove from outlet. Do not unplug by pulling on cord. 888-24-078-W-06 rev.G • 08/09 DANGER! Risk of Electric Shock DANGER! ELECTRICAL CORDS CAN BE HAZARDOUS Misuse Can Result in FIRE or DEATH by ELECTRICAL SHOCK. 7 of 16