Dell Latitude 3180 Owners Manual - Page 21

Installing system board

Get Dell Latitude 3180 PDF manuals and user guides View all Dell Latitude 3180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing system board 1. Align the system board with the screw holders on the palm rest assembly. 2. Replace the M2.0x3.0 screws to secure the system board to the palm rest assembly. 3. Connect the display cable to the connector on the system board. 4. Place the metal bracket over the connector, and tighten the M2.0x3.0 screws to secure the display cable to the system board. 5. Connect the WLAN cables. 6. Place the metal bracket on the WLAN card, and tighten the M2.0x3.0 screw to secure the WLAN cable on the WLAN card. 7. Place the metal bracket on the system board and tighten M2.0x3.0 screws to secure on the system board. 8. Connect the following cables: a. power connector cable b. touchpad cable c. keyboard cable d. speaker cable e. audio cable f. coin cell battery cable g. camera cable 9. Install the: a. SSD card b. battery c. base cover d. microSD card 10. Follow the procedure in After working inside your computer. Disassembly and reassembly 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
Installing system board
1.
Align the system board with the screw holders on the palm rest assembly.
2.
Replace the M2.0x3.0 screws to secure the system board to the palm rest assembly.
3.
Connect the display cable to the connector on the system board.
4.
Place the metal bracket over the connector, and tighten the M2.0x3.0 screws to secure the display cable to the system board.
5.
Connect the WLAN cables.
6.
Place the metal bracket on the WLAN card, and tighten the M2.0x3.0 screw to secure the WLAN cable on the WLAN card.
7.
Place the metal bracket on the system board and tighten M2.0x3.0 screws to secure on the system board.
8.
Connect the following cables:
a.
power connector cable
b.
touchpad cable
c.
keyboard cable
d.
speaker cable
e.
audio cable
f.
coin cell battery cable
g.
camera cable
9.
Install the:
a.
SSD card
b.
battery
c.
base cover
d.
microSD card
10.
Follow the procedure in
After working inside your computer
.
Disassembly and reassembly
21