Dell Latitude 3340 Dell Owners Manual - Page 27
Installing the System Fan, Removing the Heatsink
View all Dell Latitude 3340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the System Fan 1. Perform the following steps to install the system fan: a) Place the system fan in its slot in the computer. b) Connect the system-fan cable and power cable to the system board. c) Tighten the screws to secure the system fan to the computer. d) Route the power cable to its holder in the computer. 2. Install the: a) battery b) base cover 3. Follow the procedures in After Working Inside Your Computer. Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) battery b) base cover c) system fan 3. Un-route the WLAN antenna cables from their channels on the system board. 27
Installing the System Fan
1.
Perform the following steps to install the system fan:
a)
Place the system fan in its slot in the computer.
b)
Connect the system-fan cable and power cable to the system board.
c)
Tighten the screws to secure the system fan to the computer.
d)
Route the power cable to its holder in the computer.
2.
Install the:
a)
battery
b)
base cover
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a)
battery
b)
base cover
c)
system fan
3.
Un-route the WLAN antenna cables from their channels on the system board.
27