Dell Latitude 7280 Owners Manual - Page 13
Installing battery, PCIe Solid State Drive (SSD), Removing PCIe SSD
View all Dell Latitude 7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing battery 1. Insert the battery into the slot on the computer. 2. Route the battery cable through the routing clip and connect the battery cable to the connector on the system board. NOTE: Route the battery cable, if the cable at the base of the battery is un routed. 3. Tighten the M2.0 x 5.0 screws to secure the battery to the computer. NOTE: A small battery (3-cell) has a single screw, a larger battery (4-cell) has two screws. 4. Install the base cover 5. Follow the procedure in After working inside your computer. PCIe Solid State Drive (SSD) Removing PCIe SSD 1. Follow the procedure in Before working inside your computer. 2. Remove the : a. base cover b. battery 3. To remove the PCIe SSD: a. Loosen the M2 x3 captive screw that secure the SSD bracket [1]. b. Remove the SSD bracket [2]. c. Remove the PCIe SSD from the connector on the system board [3]. Disassembly and reassembly 13