Dell Latitude CP M233XT Service Manual - Page 36
SCSI Devices - Tests the SCSI controller in the C/Port APR or the C/Dock
![]() |
View all Dell Latitude CP M233XT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SCSI Devices - Tests the SCSI controller in the C/Port APR or the C/Dock Expansion Station Network Interface - Tests the network controller in the C/Port APR or the C/Dock Expansion Station Audio - Tests the built-in sound subsystem Other - Tests the cooling fan, which works with the air intake on the computer as part of the automatic thermal management system. Follow these steps to start the diagnostics. NOTE: You must have a diskette-drive cable to perform the following procedure. If you do not have a diskette-drive cable, you can get one from Dell. See Chapter 5, "Getting Help," in the Reference and Troubleshooting Guide for information on contacting Dell. Starting the diagnostics causes the Dell logo screen to appear, followed by a message indicating that the diagnostics is loading. Before the diagnostics loads, a program tests the portion of main memory (RAM) required for loading the diagnostics. If a main memory error is detected, a message appears on the screen telling you which memory address failed. If no errors are found in main memory, the diagnostics loads and the Diagnostics Menu appears. This menu lets you choose the following options or exit to the MS-DOS prompt: Run Quick Tests - Runs selected tests from all test groups to quickly locate the failure or to indicate where further testing may be needed to isolate a failure Run All Tests - Runs all tests for a thorough test of the computer Run Specific Tests - Tests a particular area or subsystem 3-10 Dell Latitude CP and CPi Service Manual
![](/manual_guide/products/dell-latitude-cpi-service-manual-976931c/36.png)