Dell Latitude D500 Service Manual - Page 12

If the memory module is not installed properly, the computer does not, module and reinstall it.

Get Dell Latitude D500 PDF manuals and user guides View all Dell Latitude D500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Manual NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "JDIM (Slot 1)" before you install a module in the connector labeled "JDIM2." 4. Ground yourself and install the new memory module: a. Align the notch in the module with the slot in the center of the connector. b. Slide the edge of the module firmly into the connector, and rotate the module down until you feel a click. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer does not boot. No error message indicates this failure. 5. Replace the cover and screw. NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer. file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (3 of 10) [2/28/2004 8:08:21 AM]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Memory Module, Mini PCI Card, and Devices: Dell Latitude D500 Service Manual
NOTICE:
If you need to install memory modules in two connectors, install a
memory module in the connector labeled "JDIM (Slot 1)" before you install a
module in the connector labeled "JDIM2."
4.
Ground yourself and install the new memory module:
a.
Align the notch in the module with the slot in the center of the connector.
b.
Slide the edge of the module firmly into the connector, and rotate the
module down until you feel a click. If you do not feel the click, remove the
module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer does not
boot. No error message indicates this failure.
5.
Replace the cover and screw.
NOTICE:
If the memory module cover is difficult to close, remove the module
and reinstall it. Forcing the cover to close may damage your computer.
file:///F|/Service%20Manuals/Dell/Latitude/d500/upgrades.htm (3 of 10) [2/28/2004 8:08:21 AM]