Dell Latitude D610 Service Manual - Page 6

Internal Card With Bluetooth, Wireless Technology

Page 6 highlights

Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ Latitude™ D610 Service Manual Removing the Internal Card With Bluetooth® Wireless Technology Installing the Internal Card With Bluetooth® Wireless Technology CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. Removing the Internal Card With Bluetooth® Wireless Technology 1. Follow the instructions in "Preparing to Work Inside the Computer." 2. Remove the battery. 3. Press down and pull on the tab to open the card door. 4. Disconnect the card cable connector from the card, and remove the door with the card from the computer. NOTICE: Press down the lever gently to avoid damaging it. 5. Holding the card by the card connector, press down the lever, and lift the card off the plastic knob. 6. Slide the card out of the plastic brackets. 1 card cable connector 2 card connector 3 plastic brackets (2) 4 internal card with Bluetooth wireless technology 5 lever 6 plastic knob 7 tab on card door Installing the Internal Card With Bluetooth® Wireless Technology 1. Slide the card into the plastic brackets on the door, and press the card onto the plastic knob. NOTICE: Be careful not to break the plastic when closing the door.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

Back to Contents Page
Internal Card With Bluetooth
®
Wireless Technology
Dell™ Latitude™ D610 Service Manual
Removing the Internal Card With Bluetooth
®
Wireless Technology
Installing the Internal Card With Bluetooth
®
Wireless Technology
Removing the Internal Card With Bluetooth
®
Wireless Technology
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the battery.
3.
Press down and pull on the tab to open the card door.
4.
Disconnect the card cable connector from the card, and remove the door with the card from the computer.
5.
Holding the card by the card connector, press down the lever, and lift the card off the plastic knob.
6.
Slide the card out of the plastic brackets.
Installing the Internal Card With Bluetooth
®
Wireless Technology
1.
Slide the card into the plastic brackets on the door, and press the card onto the plastic knob.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
Press down the lever gently to avoid damaging it.
1
card cable connector
2
card connector
3
plastic brackets (2)
4
internal card with Bluetooth wireless technology
5
lever
6
plastic knob
7
tab on card door
NOTICE:
Be careful not to break the plastic when closing the door.