Dell Latitude E6420 Owners Manual - Page 49
Installing The Heat Sink
View all Dell Latitude E6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
11. Remove the processor from the system. Installing The Heat Sink 1. Insert the processor back into the system. 2. Rotate the processor cam lock in a clockwise direction. 3. Place the heat sink assembly into the system. 4. Tighten the four screws securing the heat sink. 5. Connect the heat sink assembly cable. 6. Install the Base Cover. 7. Install the Secure Digital (SD) Card. 8. Install the Battery. 9. Install the ATG Port Cover (only for E6420 ATG systems). 10. Install the ATG Handle (only for E6420 ATG systems). 11. Follow the procedures in After Working Inside Your Computer. 49
11.
Remove the processor from the system.
Installing The Heat Sink
1.
Insert the processor back into the system.
2.
Rotate the processor cam lock in a clockwise direction.
3.
Place the heat sink assembly into the system.
4.
Tighten the four screws securing the heat sink.
5.
Connect the heat sink assembly cable.
6.
Install the
Base Cover
.
7.
Install the
Secure Digital (SD) Card
.
8.
Install the
Battery
.
9.
Install the
ATG Port Cover
(only for E6420 ATG systems).
10.
Install the
ATG Handle
(only for E6420 ATG systems).
11.
Follow the procedures in
After Working Inside Your Computer
.
49