Dell Latitude E7440 Owner's Manual - Page 20

Installing the mSATA SSD Card, Removing the Memory Module, Installing the Memory Module, Removing

Get Dell Latitude E7440 PDF manuals and user guides View all Dell Latitude E7440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Installing the mSATA SSD Card 1. Place the mSATA SSD card in its slot in the computer. 2. Tighten the screw to secure the mSATA SSD card to the computer. 3. Install: a) base cover b) SD card c) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Memory Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover 3. Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board. Installing the Memory Module 1. Insert the memory module into the socket. 2. Press the retention clips to secure the memory module to the system board. 3. Install: a) base cover b) battery 4. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) base cover 3. Slide the coin-cell battery cable and disconnect from the system board. Remove the coin-cell battery from the computer. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Installing the mSATA SSD Card
1.
Place the mSATA SSD card in its slot in the computer.
2.
Tighten the screw to secure the mSATA SSD card to the computer.
3.
Install:
a)
base cover
b)
SD card
c)
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory Module
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
3.
Pry the securing clips away from the memory module until it pops up. Remove the memory module from its
connector on the system board.
Installing the Memory Module
1.
Insert the memory module into the socket.
2.
Press the retention clips to secure the memory module to the system board.
3.
Install:
a)
base cover
b)
battery
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a)
battery
b)
base cover
3.
Slide the coin-cell battery cable and disconnect from the system board. Remove the coin-cell battery from the
computer.
20