Dell MX9116n OS10 Enterprise Edition User Guide for PowerEdge MX IO Modules Re - Page 542
seq deny (IPv6
View all Dell MX9116n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 542 highlights
• udp - (Optional) Enter the UDP address to deny. • A.B.C.D - Enter the IP address in dotted decimal format. • A.B.C.D/x - Enter the number of bits that must match the dotted decimal address. • any - (Optional) Set all routes which are subject to the filter: - capture - (Optional) Capture packets the filter processes. - count - (Optional) Count packets the filter processes. - byte - (Optional) Count bytes the filter processes. - dscp value - (Optional) Permit a packet based on the DSCP values, from 0 to 63. - fragment - (Optional) Use ACLs to control packet fragments. • host ip-address - (Optional) Enter the IP address to use a host address only. Default Command Mode Usage Information Example Not configured IPV4-ACL OS10 cannot count both packets and bytes; when you enter the count byte options, only bytes increment. The no version of this command removes the filter, or use the no seq sequence-number command if you know the filter's sequence number. OS10(config)# ip access-list testflow OS10(conf-ipv4-acl)# seq 10 deny tcp any any capture session 1 Supported Releases 10.2.0E or later seq deny (IPv6) Assigns a sequence number to deny IPv6 addresses while creating the filter. Syntax seq sequence-number deny [protocol-number icmp | ip | tcp | udp] [A::B | A::B/x | any | host ipv6-address] [A::B | A::B/x | any | host ipv6-address] [capture | count [byte] | dscp value | fragment] Parameters • sequence-number - Enter the sequence number to identify the route-map for editing and sequencing number, from 1 to 16777214. • protocol-number - (Optional) Enter the protocol number, from 0 to 255. • icmp - (Optional) Enter the ICMP address to deny. • ip - (Optional) Enter the IP address to deny. • tcp - (Optional) Enter the TCP address to deny. • udp - (Optional) Enter the UDP address to deny. • A::B - Enter the IPv6 address in hexadecimal format separated by colons. • A::B/x - Enter the number of bits that must match the IPv6 address. • any - (Optional) Determine route types: - capture - (Optional) Enter to capture packets the filter processes. - count - (Optional) Enter to count packets the filter processes. - byte - (Optional) Enter to count bytes the filter processes. - dscp value - (Optional) Enter to deny a packet based on the DSCP values, from 0 to 63. - fragment - (Optional) Enter to use ACLs to control packet fragments. • host ipv6-address - (Optional) Enter to use an IPv6 host address only. 542 Access Control Lists