Dell OptiPlex 3020 Dell OptiPlex 3020-Mini Tower Owners Manual - Page 26
Installing the I/O Panel, Thread the I/O panel and USB data cable into the chassis clip.
View all Dell OptiPlex 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6. Release and pull the I/O panel along with its cable out of the computer. Installing the I/O Panel 1. Insert the I/O panel into the slot on the chassis front. 2. Slide the I/O panel towards the right of the computer to secure to the chassis. 3. Tighten the screw to secure the I/O panel to the chassis. 4. Thread the I/O panel and USB data cable into the chassis clip. 5. Connect the I/O panel and USB data cable to the system board. 6. Install : a) front bezel b) cover 26
6.
Release and pull the I/O panel along with its cable out of the computer.
Installing the I/O Panel
1.
Insert the I/O panel into the slot on the chassis front.
2.
Slide the I/O panel towards the right of the computer to secure to the chassis.
3.
Tighten the screw to secure the I/O panel to the chassis.
4.
Thread the I/O panel and USB data cable into the chassis clip.
5.
Connect the I/O panel and USB data cable to the system board.
6.
Install :
a)
front bezel
b)
cover
26