Dell OptiPlex 390 Owners Manual - Page 34
Installing The Power Switch Cable
View all Dell OptiPlex 390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
8. Slide the power-switch cable out through the front of the computer. Installing The Power Switch Cable 1. Slide the power switch cable in through the front of the computer. 2. Secure the power switch cable to the chassis. 3. Thread the power switch cable into the chassis clip. 4. Connect the power switch cable to the system board. 5. Install the drive cage. 6. Install the front bezel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. 34
8.
Slide the power-switch cable out through the front of the computer.
Installing The Power Switch Cable
1.
Slide the power switch cable in through the front of the computer.
2.
Secure the power switch cable to the chassis.
3.
Thread the power switch cable into the chassis clip.
4.
Connect the power switch cable to the system board.
5.
Install the
drive cage
.
6.
Install the
front bezel
.
7.
Install the
cover
.
8.
Follow the procedures in
After Working Inside Your Computer
.
34