Dell OptiPlex 5050 Small Form Factor Owners Manual - Page 25
Installing the SD card reader, Power supply unit, Removing power supply unit (PSU)
View all Dell OptiPlex 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
a Release the power supply unit cables from the retention clips on the SD card reader enclosure [1]. b Remove the screws that secure the SD card reader and lift it away from the computer [2] [3]. Installing the SD card reader 1 Place the SD card reader on the chassis. 2 Tighten the screws that secure the SD card reader to the computer. 3 Install the: a M.2 PCIe SSD b optical drive c 2.5-inch drive assembly d bezel e cover 4 Follow the procedure in After working inside your computer. Power supply unit Removing power supply unit (PSU) 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover Removing and installing components 25
a
Release the power supply unit cables from the retention clips on the SD card reader enclosure [1].
b
Remove the screws that secure the SD card reader and lift it away from the computer [2] [3].
Installing the SD card reader
1
Place the SD card reader on the chassis.
2
Tighten the screws that secure the SD card reader to the computer.
3
Install the:
a
M.2 PCIe SSD
b
optical drive
c
2.5–inch drive assembly
d
bezel
e
cover
4
Follow the procedure in
After working inside your computer
.
Power supply unit
Removing power supply unit (PSU)
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
Removing and installing components
25