Dell OptiPlex 5050 Small Form Factor Owners Manual - Page 28
Installing the power supply unit (PSU), Power switch, Removing power switch
View all Dell OptiPlex 5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the power supply unit (PSU) 1 Insert the PSU in the chassis and slide it toward the back of the computer to secure it. 2 Tighten the screws to secure the PSU to the back of the computer. 3 Route the PSU cables through the retention clips. 4 Connect the power cables to the system board. 5 Install the: a optical drive b 2.5-inch drive assembly c bezel d cover 6 Follow the procedure in After working inside your computer. Power switch Removing power switch 1 Follow the procedure in Before working inside your computer. 2 Remove the: a cover b bezel 28 Removing and installing components
Installing the power supply unit (PSU)
1
Insert the PSU in the chassis and slide it toward the back of the computer to secure it.
2
Tighten the screws to secure the PSU to the back of the computer.
3
Route the PSU cables through the retention clips.
4
Connect the power cables to the system board.
5
Install the:
a
optical drive
b
2.5–inch drive assembly
c
bezel
d
cover
6
Follow the procedure in
After working inside your computer
.
Power switch
Removing power switch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
cover
b
bezel
28
Removing and installing components