Dell OptiPlex 5055 Ryzen APU Tower Owners Manual - Page 36
Installing power supply unit – PSU, Intrusion switch, Removing intrusion switch
View all Dell OptiPlex 5055 Ryzen APU Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing power supply unit - PSU 1. Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place. 2. Replace the screws( 6+/-1) to secure the PSU to the computer. 3. Route the PSU cables through the retention clips. 4. Connect the PSU cables to the connectors on the system board. 5. Close the front panel door. 6. Install the: a. Front bezel b. Side Cover 7. Follow the procedure in After working inside your computer. Intrusion switch Removing intrusion switch 1. Follow the procedure in Before working inside your computer. 2. Remove the: a. Side Cover b. Front bezel 36 Field service information
Installing power supply unit – PSU
1.
Insert the PSU into the PSU slot and slide it toward the back of the computer until it clicks into place.
2.
Replace the screws( 6+/-1) to secure the PSU to the computer.
3.
Route the PSU cables through the retention clips.
4.
Connect the PSU cables to the connectors on the system board.
5.
Close the front panel door.
6.
Install the:
a.
Front bezel
b.
Side Cover
7.
Follow the procedure in
After working inside your computer
.
Intrusion switch
Removing intrusion switch
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the:
a.
Side Cover
b.
Front bezel
36
Field service information