Dell OptiPlex 5080 Tower Setup and specifications guide - Page 33
Maintenance, System logs, Advanced configuration, Table 33. Maintenance, Table 34. System Logs
![]() |
View all Dell OptiPlex 5080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Maintenance Table 33. Maintenance Option Description Service Tag Displays the service tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. SERR Messages BIOS Downgrade Controls the SERR message mechanism. This option is set by default. Some graphics cards require that the SERR message mechanism be disabled. Allows you to flash previous revisions of the system firmware. ● Allow BIOS Downgrade This option is set by default. Data Wipe Allows you to securely erase data from all internal storage devices. ● Wipe on Next Boot This option is not set by default. BIOS Recovery BIOS Recovery from Hard Drive-This option is set by default. Allows you to recover the corrupted BIOS from a recovery file on the HDD or an external USB key. NOTE: BIOS Recovery from Hard Drive field must be enabled. Always Perform Integrity Check-Performs integrity check on every boot. First Power On Date Allows you the set Ownership date. The option Set Ownership Date is not set by default. System logs Table 34. System Logs Option Description BIOS events Allows you to view and clear the System Setup (BIOS) POST events. Advanced configuration Table 35. Advanced configuration Option Description ASPM Allows you to set the ASPM level. ● Auto (default) - There is handshaking between the device and PCI Express hub to determine the best ASPM mode supported by the device ● Disabled - ASPM power management is turned off at all time ● L1 Only - ASPM power management is set to use L1 System setup 33
![](/manual_guide/products/dell-optiplex-5080-tower-setup-specifications-guide-27cd40f/33.png)