Dell OptiPlex 7000 Small Form Factor Service Manual - Page 36
Bay-support bracket, Removing the bay-support bracket
View all Dell OptiPlex 7000 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Steps 1. Align the notch on the 2280 solid-state drive with the tab on the M.2 card slot on the system board. 2. Slide the 2280 solid-state drive into the M.2 card slot on the system board. 3. Replace the screw (M2x3) that secures the 2280 solid-state drive to the system board. Next steps 1. Install the hard-drive and optical-drive bracket. 2. Install the 3.5-inch hard-drive. 3. Install the 2.5-inch hard-drive. 4. Install the front bezel. 5. Install the side cover. 6. Follow the procedure in after working inside your computer. Bay-support bracket Removing the bay-support bracket Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the 2.5-inch hard-drive. 5. Remove the 3.5-inch hard-drive. 36 Removing and installing components