Dell OptiPlex 7080 Tower Setup and specifications guide - Page 32
Manageability, Virtualization support, Table 30. POST Behavior continued, Table 31. Manageability
![]() |
View all Dell OptiPlex 7080 Tower manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Table 30. POST Behavior (continued) Option Description ● Minimal - The system boots quickly, unless the BIOS has been updated, memory changed, or the previous POST did not complete. ● Thorough - The system does not skip any steps in the boot process. ● Auto - This allows the operating system to control this setting (this works only when the operating system supports Simple Boot Flag). This option is set to Thorough by default. Extend BIOS POST Time This option creates an additional pre-boot delay. ● 0 seconds (default) ● 5 seconds ● 10 seconds Full Screen Logo This option will display full screen logo if your image match screen resolution. The option Enable Full Screen Logo is not set by default. Warnings and Errors This option causes the boot process to only pause when warning or errors are detected. Choose any one of the option: ● Prompt on Warnings and Errors - default ● Continue on Warnings ● Continue on Warnings and Errors Manageability Table 31. Manageability Option Intel AMT Capability USB provision MEBx Hotkey Description This option enables you to enable or disable Intel AMT capability. The options are: ● Disabled ● Enabled-enabled by default ● Restrict MEBx Access This option is disabled by default. This option is enabled by default. Virtualization support Table 32. Virtualization Support Option Description Virtualization This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by the Intel Virtualization technology. ● Enable Intel Virtualization Technology This option is set by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by the Intel Virtualization technology for direct I/O. ● Enable VT for Direct I/O This option is set by default. 32 System setup
![](/manual_guide/products/dell-optiplex-7080-tower-setup-specifications-guide-3e3c76d/32.png)