Dell OptiPlex 7090 Small Form Factor Service Manual - Page 34
Installing the SD-card reader
View all Dell OptiPlex 7090 Small Form Factor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
About this task The following images indicate the location of the SD card and provide a visual representation of the removal procedure. Steps 1. Unroute the PSU cable from the routing guides on the SD-card reader bracket. 2. Remove the two screws (M3x5) that secure the SD-card bracket to the system board and computer. 3. Lift the SD-card reader from the connector on the system board. Installing the SD-card reader Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the SD-card reader and provides a visual representation of the installation procedure. 34 Removing and installing components
About this task
The following images indicate the location of the SD card and provide a visual representation of the removal procedure.
Steps
1.
Unroute the PSU cable from the routing guides on the SD-card reader bracket.
2.
Remove the two screws (M3x5) that secure the SD-card bracket to the system board and computer.
3.
Lift the SD-card reader from the connector on the system board.
Installing the SD-card reader
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the SD-card reader and provides a visual representation of the installation
procedure.
34
Removing and installing components