Dell OptiPlex 7090 Tower Setup and Specifications - Page 24

Energy Star, EPEAT and Trusted Platform Module (TPM) Table 22. Energy Star, EPEAT and TPM Features Energy Star 8.0 EPEAT Trusted Platform Module (TPM) 2.01,2 Firmware-TPM (Discrete TPM disabled) Specifications Compliant configurations available Gold and Silver compliant configurations available Integrated on system board Optional NOTE: 1TPM 2.0 is FIPS 140-2 certified. 2TPM is not available in all countries. Operating and storage environment This table lists the operating and storage specifications of your OptiPlex 7090 Tower. Airborne contaminant level: G1 as defined by ISA-S71.04-1985 Table 23. Computer environment Description Temperature range Operating 10 °C-35°C (50 °F-95°F) Storage -40°C-65°C (-40°F-149°F) Relative humidity (maximum) 20% to 80% (non-condensing, Max dew 5% to 95% (non-condensing, Max dew point temperature = 26°C) point temperature = 33°C) Vibration (maximum)* 0.26 GRMS random at 5 Hz to 350 Hz 1.37 GRMS random at 5 Hz to 350 Hz Shock (maximum) Bottom half-sine pulse with a change in 105G half-sine pulse with a change in velocity of 50.8 cm/sec (20 in./sec) velocity of 133 cm/sec (52.5 in./sec) Altitude range 3048 m (10,000 ft) 10,668 m (35,000 ft) CAUTION: Operating and storage temperature ranges may differ among components, so operating or storing the device outside these ranges may impact the performance of specific components. * Measured using a random vibration spectrum that simulates user environment. † Measured using a 2 ms half-sine pulse when the hard drive is in use. 24 Specifications of OptiPlex 7090 Tower