Dell OptiPlex SX270 Setup and Quick Reference Guide - Page 16
Attaching the Stand, Connecting the AC Adapter, three mounting slots on the back of the computer. - not powering
View all Dell OptiPlex SX270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
www.dell.com | support.dell.com NOTE: If you are installing the computer under a desktop or tabletop, first attach all cables, and then attach the stand to the mounting plate (see "Attaching the Stand to the Mounting Plate" on page 19). 3 Attaching the Stand 1 Raise the captive screw and slide the chassis stand slat into one of three mounting slots on the back of the computer. 2 When the stand is in place, tighten the screw. NOTICE: If your computer is oriented under a desktop or tabletop and is in a high-vibration environment, use the optional wall-mount bracket instead of the computer stand. NOTE: The power adapter LED will light when the adapter is properly plugged into a wall outlet and into the computer. 4 Connecting the AC Adapter 1 Connect the power adapter to the connector on the back of the computer. 2 Connect the power cable to the power adapter. NOTICE: The following steps apply to Japan only. 14 Setup and Quick Re ference Guide