Dell PowerConnect 2224 Technical Specifications Update for the Dell™ - Page 1

K5672A00.fm Page 1 Friday, February 20, 2004 3:45 PM www.dell.com | support.dell.com Dell™ PowerConnect™ 2200/2300 Series Ethernet Switches Introduction This document describes changes to the technical specifications of the PowerConnect 2200/2300 series Ethernet switches. This information replaces and supercedes that found in the Dell PowerConnect 2216/2224/2324 Switches User's Guide. Where any differences exist in the specifications or procedures between the two documents, the information in this document is more accurate. Product Specifications • PowerConnect 2216 - Provides 16 ports supporting 10/100Base-T Ethernet. - All ports support full- or half-duplex mode and PAUSE frames. • PowerConnect 2224 - Provides 24 ports supporting 10/100Base-T Ethernet. - All ports support full- or half-duplex mode and PAUSE frames. • PowerConnect 2324 - Provides 24 ports supporting 10/100Base-T Ethernet and an additional 2 ports supporting 1000Base-T Ethernet. - The 10/100Base-T ports support full- or half-duplex mode; the 1000Base-T ports support full-duplex mode only. - The 10/100Base-T ports support PAUSE frames; the 1000Base-T ports do not support PAUSE frames. Front-Panel Indicators 1000Base-T Ports Link/Activity (SPD/LNK/ACT) LED (PowerConnect 2324 only) • Steady green - A 1000 Mbps link has been established, but no data is being transmitted or received. • Blinking green - A 1000 Mbps link has been established and data is being transmitted or received. • Off - No link has been established. NOTE: No link will will be detected if a 10/100Base-T device is connected to a 1000Base-T port (ports 25 and 26) on the PowerConnect 2324 switch. February 2004 0K5672A00