Dell PowerConnect 2224 Technical Specifications Update for the Dell™ - Page 2

Additional Troubleshooting Step - user guide

Page 2 highlights

www.dell.com | support.dell.com K5672A00.fm Page 2 Friday, February 20, 2004 3:45 PM Additional Troubleshooting Step The following information is in addition to that found in Table 2-1 in the Dell PowerConnect 2216/2224/2324 Switches User's Guide. Problem Probable Cause Corrective Action Link LED is not lighted A 10/100Base-T-capable device or Connect only 1000Base-T full- 1000Base-T half-duplex device is duplex capable devices to ports connected to a 1000Base-T port 25 or 26 on the PowerConnect (ports 25 and 26) on a 2324 switch. PowerConnect 2324 switch. Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved. Printed in China. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, and PowerConnect are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

  • 1
  • 2

www.dell.com | support.dell.com
Additional Troubleshooting Step
The following information is in addition to that found in Table 2-1 in the
Dell PowerConnect
2216/2224/2324 Switches User’s Guide
.
____________________
Information in this document is subject to change without notice.
© 2004 Dell Inc. All rights reserved. Printed in China.
Reproduction in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text:
Dell
, the
DELL
logo, and
PowerConnect
are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Problem
Probable Cause
Corrective Action
Link LED is not lighted
A 10/100Base-T-capable device or
1000Base-T half-duplex device is
connected to a 1000Base-T port
(ports 25 and 26) on a
PowerConnect 2324 switch.
Connect only 1000Base-T full-
duplex capable devices to ports
25 or 26 on the PowerConnect
2324 switch.
K5672A00.fm
Page 2
Friday, February 20, 2004
3:45 PM