Dell PowerConnect 6224P User's Guide - Page 177
Host Name / IP Address, Timeout for Reply 1
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Figure 6-50. TACACS+ Settings The TACACS+ Settings page contains the following fields: • Host Name / IP Address - Specifies the TACACS+ Server. • Priority (0-65535) - Specifies the order in which the TACACS+ servers are used. The default is 0. • Authentication Port (0-65535) - The port number through which the TACACS+ session occurs. The default is port 49. • Key String (0-128 Characters) - Defines the authentication and encryption key for TACACS+ communications between the device and the TACACS+ server. This key must match the encryption used on the TACACS+ server. Check Use Default to use the default value. • Timeout for Reply (1-30) - The amount of time that passes before the connection between the device and the TACACS+ server times out. The field range is from 1 to 30 seconds. Check Use Default to select the factory-default value. • Status - The connection status between the device and the TACACS+ server. The possible field values are: - Connected - There is currently a connection between the device and the TACACS+ server. - Not Connected - There is not currently a connection between the device and the TACACS+ server. The fields in the Default Parameters section of the page contain values that are automatically applied to new TACACS+ servers. • Key String (0-128 Characters) - Enter the default authentication and encryption key for TACACS+ communication between the device and the TACACS+ server. Configuring System Information 177