Dell PowerConnect 6224P User's Guide - Page 531
Local Link LSA Checksum, Backup Designated Router
View all Dell PowerConnect 6224P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 531 highlights
- Designated Router - This router is itself the Designated Router on the attached network. Adjacencies are established to all other routers attached to the network. The router must also originate a network-LSA for the network node. The network- LSA contains links to all routers (including the Designated Router itself) attached to the network. - Backup Designated Router - This router is the Backup Designated Router on the attached network. It is promoted to Designated Router if the present Designated Router fails. The router establishes adjacencies to all other routers attached to the network. The Backup Designated Router performs slightly different functions during the Flooding Procedure, as compared to the Designated Router. - Other Designated Router - The interface is connected to a broadcast or NBMA network on which other routers have been selected to be the Designated Router and Backup Designated Router either. The router attempts to form adjacencies to both the Designated Router and the Backup Designated Router. • Designated Router - The identity of the Designated Router for this network, in the view of the advertising router. The Designated Router is identified here by its router ID. The value 0.0.0.0 means that there is no Designated Router. This field is only displayed if the OSPF admin mode is enabled. • Backup Designated Router - The identity of the Backup Designated Router for this network, in the view of the advertising router. The Backup Designated Router is identified here by its router ID. Set to 0.0.0.0 if there is no Backup Designated Router. This field is only displayed if the OSPF admin mode is enabled. • Number of Link Events - This is the number of times the specified OSPF interface has changed its state. This field is only displayed if the OSPF admin mode is enabled. • Local Link LSAs - The number of opaque LSAs whose flooding scope is the link on this interface. • Local Link LSA Checksum - The sum of the checksums of local link LSAs for this link. • Metric Cost - Enter the value on this interface for the cost TOS (type of service). The range for the metric cost is between 1 and 65,535. Metric Cost is only configurable/displayed if OSPF is initialized on the interface. Configuring an OSPF Interface 1. Open the OSPF Interface Configuration page. 2. Specify an interface to configure. 3. Specify values in the remaining fields as needed. 4. Click Apply Changes. The OSPF interface is configured. Displaying an OSPF Interface Configuration 1. Open the OSPF Interface Configuration page. 2. Select the VLAN interface for which data is to be displayed from the drop-down menu. Configuring Routing 531