Dell PowerConnect 6248 Configuration Guide - Page 131
Example 7: Modify the Default Captive Portal Configuration Change Verification Method to Local
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Example 7: Modify the Default Captive Portal Configuration (Change Verification Method to Local) To change the verification method to local, use the following command: console(config-CP 1)#verification local To view the configuration change, use the following command: console#show captive-portal configuration 1 status CP ID 1 CP Name Default CP Mode Enable Protocol Mode HTTP Verification Mode Local Group ID 1 Group Name Default User Logout Mode Enable URL Redirect Mode Disable Session Timeout 0 Idle Timeout 0 Max Bandwidth Up (bytes/sec 0 Max Bandwidth Down (bytes/sec 0 Max Input Octets (bytes 0 Max Output Octets (bytes 0 Max Total Octets (bytes 0 Device Security 131
Device Security
131
Example 7: Modify the Default Captive Portal Configuration (Change Verification Method to Local)
To change the verification method to local, use the following command:
console(config-CP 1)#verification local
To view the configuration change, use the following command:
console#show captive-portal configuration 1 status
CP ID
..........................................
1
CP Name
........................................
Default
CP Mode
........................................
Enable
Protocol Mode
..................................
HTTP
Verification Mode
..............................
Local
Group ID
.......................................
1
Group Name
.....................................
Default
User Logout Mode
...............................
Enable
URL Redirect Mode
..............................
Disable
Session Timeout
................................
0
Idle Timeout
...................................
0
Max Bandwidth Up (bytes/sec)
...................
0
Max Bandwidth Down (bytes/sec)
.................
0
Max Input Octets (bytes)
.......................
0
Max Output Octets (bytes)
......................
0
Max Total Octets (bytes)
.......................
0