Dell PowerConnect 6248 Configuration Guide - Page 76
Using the Web Interface to Con VLAN Routing
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Example 3: Set Up VLAN Routing for the VLANs and Assign an IP Address The following code sequence shows how to enable routing for the VLANs and how to configure the IP addresses and subnet masks for the virtual router ports.: console#configure console(config)#interface vlan 10 console(config-if-vlan10)#routing console(config-if-vlan10)#ip address 192.150.3.1 255.255.255.0 console(config-if-vlan10)#exit console#configure console(config)#interface vlan 20 console(config-if-vlan20)#routing console(config-if-vlan20)#ip address 192.150.4.1 255.255.255.0 console(config-if-vlan20)#exit Example 4: Enable Routing for the Switch: In order for the VLAN to function as a routing interface, you must enable routing on the VLAN and on the switch. console(config)#ip routing Using the Web Interface to Configure VLAN Routing Use the following screens to perform the same configuration using the Web Interface: • Switching > VLAN > VLAN Membership. To create the VLANs and specify port participation. • Switching > VLAN > Port Settings. To set the PVID and VLAN type. • Routing > VLAN Routing > Configuration. To enable routing on Vlans. • Routing > IP > Configuration. To enable routing for the switch. • Routing > IP > Interface Configuration. To configure VLAN IP addresses and subnet masks. 76 Routing Configuration