Dell PowerConnect B-RX4 BigIron RX Configuration Guide (Supporting Multi-Servi - Page 1234

45 Displaying BGP4+ information TABLE 194 Summary of route information received from a BGP4+ neighbor (Continued) This field... Displays... Weight Status The value that this switch associates with routes from a specific neighbor. For example, if the switch receives routes to the same destination from two BGP4+ neighbors, the switch prefers the route from the neighbor with the larger weight. The advertised route's status, which can be one or more of the following: A - AGGREGATE. The route is an aggregate route for multiple networks. B - BEST. BGP4+ has determined that this is the optimal route to the destination. b - NOT-INSTALLED-BEST - BGP4+ has determined that this is the optimal route to the destination but did not install it in the IPv6 route table because the switch received better routes from other sources (such as OSPFv3, RIPng, or static IPv6 routes). D - DAMPED. This route has been dampened (by the route dampening feature), and is currently unusable. E - EBGP. The route was learned through a switch in another AS. H - HISTORY. Route dampening is configured for this route, and the route has a history of flapping and is unreachable now. I - IBGP. The route was learned through a switch in the same AS. L - LOCAL. The route originated on this switch. M - MULTIPATH. BGP4+ load sharing is enabled and this route was selected as one of the best ones to the destination. The best route among the multiple paths also is marked with "B". Note: If the "m" is shown in lowercase, the software was not able to install the route in the IPv6 route table. S - SUPPRESSED. This route was suppressed during aggregation and thus is not advertised to neighbors. F - FILTERED. This route was filtered out by BGP4+ route policies on the switch, but the switch saved updates containing the filtered routes. 1162 BigIron RX Series Configuration Guide 53-1001810-01