Dell PowerConnect B-RX4 Getting Started Guide - Page 7

Items required for installation, Items shipped with units, Items that you must provide

Page 7 highlights

Items required for installation This document describes how to set up the PowerConnect B-RX series and mount into 19-inch equipment racks using the brackets built onto each chassis. To center mount the chassis in a rack, order the mid-mount rack kit from your PowerConnect supplier. Installation instructions are provided with the rack kit. This section describes items shipped with the PowerConnect B-RX series and items you will need for installation. Items shipped with units The chassis ships with the following components installed: • Switch fabric modules - Four and eight-slot chassis - two switch fabric modules - 16-slot chassis - three switch fabric modules • A slot blank in each interface module slot. The slot blank covers a slot that does not currently have a module installed in it, ensuring proper airflow within the chassis. • Fans - Four and eight-slot chassis - A fan tray assembly in the front right side of the chassis. - 16-slot chassis - A fan tray assembly located in the front right side and two fan assemblies located at the rear of the of the chassis. • Power supplies (AC or DC). - The four-slot chassis contains one power supply, - The eight-slot chassis contains two power supplies. - The 16-slot chassis contains four power supplies. • A 115V AC power cable for each AC power supply you purchase. Items that you must provide • Assembled 19-inch Electronic Industries Association cabinet (EIA310-D) equipment rack. • Four standard #12-24 pan-head screws for mounting the chassis to equipment racks. • #2 Phillips-head screwdriver. • Flat head screwdriver • Mid-mount rack kit (optional). Order from your PowerConnect supplier. What you can install You can install the following components in the different chassis slots. • Four-slot chassis - Up to two management modules (one active and one redundant). - Up to three switch fabric modules. - Up to four interface modules. - Up to three power supplies (AC or DC). PowerConnect B-RX Series Getting Started Guide 7 53-1001682-03

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

PowerConnect B-RX Series Getting Started Guide
7
53-1001682-03
Items required for installation
This document describes how to set up the PowerConnect B-RX series and mount into 19-inch equipment racks
using the brackets built onto each chassis. To center mount the chassis in a rack, order the mid-mount rack kit from
your PowerConnect supplier. Installation instructions are provided with the rack kit. This section describes items
shipped with the PowerConnect B-RX series and items you will need for installation.
Items shipped with units
The chassis ships with the following components installed:
Switch fabric modules
-
Four and eight-slot chassis - two switch fabric modules
-
16-slot chassis - three switch fabric modules
A slot blank in each interface module slot. The slot blank covers a slot that does not currently have a module
installed in it, ensuring proper airflow within the chassis.
Fans
-
Four and eight-slot chassis - A fan tray assembly in the front right side of the chassis.
-
16-slot chassis - A fan tray assembly located in the front right side and two fan assemblies located at the
rear of the of the chassis.
Power supplies (AC or DC).
-
The four-slot chassis contains one power supply,
-
The eight-slot chassis contains two power supplies.
-
The 16-slot chassis contains four power supplies.
A 115V AC power cable for each AC power supply you purchase.
Items that you must provide
Assembled 19-inch Electronic Industries Association cabinet (EIA310-D) equipment rack.
Four standard #12-24 pan-head screws for mounting the chassis to equipment racks.
#2 Phillips-head screwdriver.
Flat head screwdriver
Mid-mount rack kit (optional). Order from your PowerConnect supplier.
What you can install
You can install the following components in the different chassis slots.
Four-slot chassis
-
Up to two management modules (one active and one redundant).
-
Up to three switch fabric modules.
-
Up to four interface modules.
-
Up to three power supplies (AC or DC).