Dell PowerConnect Brocade M5424 Brocade 7.1.0 Fabric OS Message Reference Guid - Page 862

5 SULB-1038 SULB-1038 Message Co-CPU has not booted up properly. Skip the firmwaredownload command on the co-CPU. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that the main CPU cannot access the co-CPU to update the firmware on the co-CPU or run any other firmware download command on the co-CPU. If the firmwareDownload command is in progress, it will continue without updating the co-CPU firmware. Recommended Action After the firmware download completes, reboot the CP manually to bring up the co-CPU and run the firmwareDownload command again. If the problem persists, your switch service provider. SULB-1039 Message CP has completed relocating the internal firmware image. Message Type AUDIT | LOG Class FIRMWARE Severity INFO Probable Cause Indicates that the firmware download process has completed normally on the control processor (CP). Recommended Action Run the firmwareShow command to verify the firmware versions. SULB-1040 Message An error has occurred during relocation of the internal image on the CP. Message Type AUDIT | LOG Class FIRMWARE Severity WARNING Probable Cause Indicates that an error has occurred during the relocation of the internal image. The error may be caused by an inconsistent internal firmware image. It may also be caused by an internal Ethernet failure. Recommended Action Run the firmwareShow command to verify the firmware versions. Run the firmwareDownload command again if the firmware is not updated. This will cause the internal image to be relocated again. If the problem persists, contact your switch service provider. 840 Fabric OS Message Reference 53-1002749-01