Dell PowerConnect J-8208 Release Notes JUNOS version 10.2 - Page 9

Outstanding Issues in JUNOS Release 10.2 for J-EX Series Switches Outstanding Issues in JUNOS Release 10.2 for J-EX Series Switches The following are outstanding issues in JUNOS Release 10.2R1 for J-EX Series switches. The identifier following the description is the tracking number in our bug database. • Access Control and Port Security • Bridging, VLANs, and Spanning Trees • Class of Service • Infrastructure • Interfaces • J-Web Interface • Layer 2 and Layer 3 Protocols • Virtual Chassis Access Control and Port Security • On J-EX Series switches, when you enable and disable IPv6 on the management interface (me0), the management information is not displayed in the show lldp local-information command output. [PR/503955] • On J-EX4200 switches, the LLDP-MED Location ID contains incorrect Type, Length, and Value (TLV). [PR/521658] • On J-EX4200 switches, deleting a static MAC address entry from the Ethernet switching table does not change the authentication status for the interface in the 802.1X table with MAC RADIUS, and the interface remains authenticated. [PR/523919] • On J-EX4200 switches with static MAC bypass of authentication configured, MAC address learning takes a few minutes after the MAC address table is cleared. [PR/524044] • On J-EX Series switches, you might experience traffic drops under certain network conditions, even though the user is authenticated. As a workaround, you may restart the dot1x-protocol. [PR/524675, 528691 Bridging, VLANs, and Spanning Trees • There might be traffic loss on VLANs learned through MVRP during GRES. After the GRES, there will not be any traffic loss. [PR/458303] • On J-EX Series switches, in a scaled environment with more than 4000 VLANs, MVRP advertisements might not be sent intermittently when the VLAN membership is modified. [PR/475701] Class of Service • On J-EX4200 switches, the show interface queue command output displays the count of transmitted packets and queued packets together under the field Queued instead of displaying the values under Queued and Transmitted fields. [PR/259525] • If you are configuring an interface as part of an aggregated Ethernet interface and also configuring CoS on that interface, do not commit both configurations using a single 9