Dell PowerConnect W-IAP Remote Release Notes - Page 9

Feature Description See the FastIron Configuration Guide, section entitled... DHCP Server with IP helper DHCP server and IP helper address are supported together on the same port. Ability to disable DHCP Server on the management port You can configure the DHCP Server to silently discard DHCP client requests received on the management port. New SNMP MIBs SNMP MIB support has been added for the following features: Dynamic ARP Inspection DHCP snooping IP Source Guard EMCP DHCP Server and Configuring an IP helper address Disabling DHCP Server on the management port IronWare MIB Reference Guide Summary of enhancements in FGS R07.2.00 Table 3 lists the enhancements in software release 07.2.00 for FGS, FGS-STK, FLS, FLS-STK, and FWS devices. Table 3 Enhancements in FGS R07.2.00 Feature Description See the FastIron Configuration Guide, section entitled... IGMP snooping querier enhancement Flexible VE numbering DHCP Server with IP helper You can use the show ip multicast vlan command to display the querier information for a VLAN. This command displays the VLAN interface status and if there is any other querier present with the lowest IP address. Displaying querier information When configuring virtual routing interfaces on a device, you can now specify a number from 1 through 4095. However, the total number of virtual routing interfaces that are configured must not exceed the system-max limit of 512. Assigning an IP address to a virtual interface DHCP server and IP helper address are supported together on the same port. DHCP Server and Configuring an IP helper address IronWare Software Release 07.2.00a for Brocade FastIron switches Release Notes v 1.0 Page 9 of 55