Dell PowerEdge 1550 Console Redirection (.pdf) - Page 4

1-2

Installing Microsoft Windows NT Server 4.0 on Dell PowerEdge 1550 Systems

±²³´µ¶¶·²¸ ´¹º »¼»± ½¾·¿º¾

To install a SCSI driver that is not included on the Windows NT Server 4.0 installation CD, perform

the following steps:

1.

Boot the system from the Windows NT Server 4.0 installation CD or from the first (boot)

diskette in the operating system installation set included with your system.

2.

Press the <²6> key when the following message is displayed:

Setup is inspecting your computer's hardware configuration...

The following message appears:

Setup could not determine the type of one or more mass storage devices

installed in your system, or you have chosen to manually specify an

adapter.

3.

Press <s> to specify an additional device.

4.

On the next screen that appears, use the arrow keys to select

Other

and then press <Enter>.

The setup program prompts you to supply the diskette containing the SCSI driver.

5.

Insert the correct diskette and press <Enter>.

The setup program displays a list of the drivers included on the diskette and prompts you to

select the correct one.

²or systems with an Adaptec 7899 SCSI controller, the correct driver is named

Adaptec

Ultra160 ±amily PCI SCSI Controller (NT 4.0)

.

²or systems with a PERC 3/DCL controller, the driver is named

PERC 2/SC; 2/DC; PERC 3/QC;

3/DC Windows NT4 Driver

.

6.

Use the arrow keys to select the correct driver and press <Enter>.

A confirmation screen appears with a list of the drivers to be loaded. Verify that the SCSI driver

you selected on the previous screen is among the drivers listed.

7.

Press <Enter> to continue.

8.

Keep the diskette containing the driver nearby. The setup program will ask for the diskette

containing the SCSI driver once more as the installation proceeds.

Dell PowerEdge 1550 Console Redirection (.pdf) - Page 4

Other, Adaptec, PERC 2/SC; 2/DC; PERC 3/QC, DC Windows NT4 Driver - server

Page 4 highlights