Dell PowerEdge 1850 Processor Upgrade Installation Guide (.pdf) - Page 3

www.dell.com | support.dell.com Figure 2. Installing a RAC Card RAC card NIC connector standoffs (4) RAC card connector 15 Enter the System Setup program and verify that the setting for the Boot Sequence has changed to reflect the presence of the card. You should see options for virtual disk for CDROM and LS-120. See "Using the System Setup Program" in your User's Guide. When the system boots, the Remote Access Control Detected message displays and the option ROM and firmware information for the RAC displays. Press to enter the configuration screen for the RAC. See the RAC card documentation for information on configuring and using the RAC card. ___________ Information in this document is subject to change without notice. © 2004 Dell Inc. All rights reserved. Printed in the U.S.A. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.