Dell PowerEdge 1955 Information Update - Page 7

Server Module Board DIP Switch, Console Redirection Information

Get Dell PowerEdge 1955 PDF manuals and user guides View all Dell PowerEdge 1955 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Server Module Board DIP Switch Table 1-2 lists all switch settings for the server-module DIP switch on the server module board. Note that switches 3 though 6 are reserved, and should not be changed from their default values. See "Switches and Connectors" in the system Installation and Troubleshooting Guide for the location of the DIP switch on the server module board. Table 1-2. Server-Module DIP Switch Settings DIP Switch PWRD_EN (Switch 1) Setting (default) Description The password feature is enabled when switch 1 is set to "on." The password feature is disabled when switch 1 is set to "off." NVRAM_CLR (Switch 2) Switch 3 (default) The configuration settings in NVRAM are retained at system boot when switch 2 is set to "off." The configuration settings in NVRAM are cleared at next system boot when switch 2 is set to "on." Reserved. Do not change. Switch 4 Reserved. Do not change. Switch 5 Reserved. Do not change. Switch 6 Reserved. Do not change. "on" "off" Console Redirection Information The Digital Access KVM (dKVM) can be connected to only one server module at a time. If the dKVM is switched to a different server module by using the KVM button located on a server module, or from the On-Screen Configuration and Reporting (OSCAR) user interface of the dKVM module, the view of other remote console redirection sessions will change to the selected server module. Information Update 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
Information Update
5
Server Module Board DIP Switch
Table 1-2 lists all switch settings for the server-module DIP switch on the server module board. Note that
switches 3 though 6 are reserved, and should not be changed from their default values. See "Switches and
Connectors" in the system
Installation and Troubleshooting Guide
for the location of the DIP switch on
the server module board.
Console Redirection Information
The Digital Access KVM (dKVM) can be connected to only one server module at a time. If the dKVM
is switched to a different server module by using the KVM button located on a server module, or from
the On-Screen Configuration and Reporting (OSCAR) user interface of the dKVM module, the view
of other remote console redirection sessions will change to the selected server module.
Table 1-2.
Server-Module DIP Switch Settings
DIP Switch
Setting
Description
PWRD_EN
(Switch 1)
(default)
The password feature is enabled when switch 1 is set to "on."
The password feature is disabled when switch 1 is set to "off."
NVRAM_CLR
(Switch 2)
(default)
The configuration settings in NVRAM are retained at system
boot when switch 2 is set to "off."
The configuration settings in NVRAM are cleared at next
system boot when switch 2 is set to "on."
Switch 3
Reserved. Do not change.
Switch 4
Reserved. Do not change.
Switch 5
Reserved. Do not change.
Switch 6
Reserved. Do not change.
"on"
"off"