Dell PowerEdge 2161DS Dell 180AS/2160AS Analog Console Switch User's Guide - Page 15
Mount the rear bracket to the rack cabinet by matching the holes in the short side
![]() |
View all Dell PowerEdge 2161DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Line up the screw holes in the bracket with the screw holes in the switch. 4 With a Phillips screwdriver, fasten the front mounting brackets to the switch using two screws on each side. 5 Attach four cage nuts or clip nuts to the rack mounting flange of the rack cabinet's front so that the nut is positioned on the inside of the rack. 6 Mount the switch assembly to the rack cabinet by matching the holes in the "short side" of each bracket to an appropriate set of matching holes on your rack cabinet. Next, insert the combination hex head screws through the slots in the bracket, then the holes in the mounting rail, and then into the cage nuts or clip nuts. 7 Attach four cage nuts or clip nuts to the rack mounting flange of the rack cabinet back so that the nut is positioned on the inside of the rack. 8 Slide the rear brackets into the channel of the front brackets adjusting them to fit the rack depth. 9 Mount the rear bracket to the rack cabinet by matching the holes in the "short side" of each bracket to an appropriate set of matching holes on your rack cabinet, ensuring the switch is level within the rack. 10 Insert the combination hex head screws through the slots in the bracket and the holes in the mounting rail, then into the cage nuts or clip nuts. Installation 15
![](/manual_guide/products/dell-poweredge-180as-dell-180as2160as-analog-console-switch-users-guide-84d5f2d/15.png)