Dell PowerEdge 2321DS Dell 180AS/2160AS Analog Console Switch User's Guide - Page 30
Assigning Device Types, Names, Devices, Sw-24, Modify, Device Modify
View all Dell PowerEdge 2321DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
www.dell.com | support.dell.com 5 Click OK in the Names dialog box to save your changes. -orClick X or press to exit the dialog box without saving changes. NOTE: If a SIP has not been assigned a name, the EID is used as the default name. Assigning Device Types While the appliance automatically discovers legacy KVM switches, you will need to specify the number of ports on the legacy switch in the Devices dialog box. You will see an indication of the switch type such as Sw-8 or Sw-24 appear in the Type category for the tiered switch. Select the switch from the list. The Modify button displays, allowing you to assign it the appropriate number of ports. NOTE: The Modify button will only be available if a configurable switch is selected. To access the Devices dialog box: 1 Press to launch OSCAR. The Main dialog box appears. 2 Click Setup - Devices. The Devices dialog box appears. Figure 3-5. Devices Dialog Box When the Console Switch discovers a legacy switch, the port numbering changes to accommodate each server under that switch. For example, if the switch is connected to ARI port 6, the switch port is listed as 06 and each server under it is numbered sequentially 06-01, 06-02 and so on. To assign a device type: 1 In the Devices dialog box, select the desired port number. 2 Click Modify. The Device Modify dialog box appears. 30 Basic Operation