Dell PowerEdge 2650 Rack Installation Guide - Page 10
Recommended Tools and Supplies, RapidRails Rack Kit Contents, Masking tape or a felt-tip pen - weight
View all Dell PowerEdge 2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
www.dell.com | support.dell.com CAUTION: After installing systems in a rack, never pull more than one system out of the rack on its slide assemblies at one time. The weight of more than one extended system could cause the rack to tip over and cause injury. The stabilizer feet help prevent the rack from tipping over when a system or other component is pulled out of the rack with the slide assemblies fully extended. Refer to the documentation provided with the rack cabinet for instructions on installing and anchoring the stabilizer feet. Recommended Tools and Supplies You may need the following tools and supplies to install the system in a four-post rack: • A #2 Phillips screwdriver (for installing VersaRails slide assemblies) • Masking tape or a felt-tip pen, for use in marking the mounting holes to be used RapidRails Rack Kit Contents The RapidRails rack kit includes the following items (see Figure 1-1): • One pair of RapidRails slide assemblies • One cable-management arm • One status indicator cable • Tie-wraps (not shown in Figure 1-1) Figure 1-1. RapidRails Rack Kit Contents cable-management arm slide assemblies (2) status indicator cable 1-4 Rack Installation Guide