Dell PowerEdge 2800 Information Update - Page 11

Table 1-2. LCD Status Messages (continued) Line 1 Line 2 Message Message Causes Corrective Actions E0D76 BP DRIVE n Faulty or improperly installed 1x2 DRIVE FAIL n hard drive or RAID controller. SCSI CONNECTOR See "Troubleshooting SCSI Hard Drives," "Troubleshooting a RAID Controller Card," and "Troubleshooting the Integrated RAID Controller" in your Installation and Troubleshooting Guide. EB107 PROC BUS ERR PROC INIT ERR PROC PROTOCOL ERR Faulty or improperly installed microprocessor or system board. See "Troubleshooting the Microprocessors" in your Installation and Troubleshooting Guide. If the problem persists, see "Getting Help" in your Installation and Troubleshooting Guide. EB107 PCIE FATAL ERR CHIPSET ERR Faulty or improperly installed PCI-e card. Faulty or improperly installed riser card. Faulty system board. Remove and reseat the PCI-e expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" in your Installation and Troubleshooting Guide. Reinstall the expansion-card cage. See "Installing the ExpansionCard Cage" in your Installation and Troubleshooting Guide. If the problem persists, the riser card or system board is faulty. See "Getting Help" in your Installation and Troubleshooting Guide. EB107 MEMORY MIRRORED Memory mirroring enabled. Information only. EB107 MEMORY SPARED Memory spare bank enabled. Information only. EFFF2 ROMB PRESENCE Integrated RAID controller is activated. Information only. IB110 SBE LOG DISABLED LOGGING DISABLED Information only. IS000 INTRUSION System cover has been removed. Information only NOTE: For the full name of an abbreviation or acronym used in this table, see the "Glossary" in your User's Guide. Information Update 9