Dell PowerEdge 6400 Diagnostics Failure Message - Page 2
PowerEdge 4400, Server Diagnostics, Copy Files, Select Devices to Test, PERC 2/DC, Device Groups, - documentation
View all Dell PowerEdge 6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
4. Select PowerEdge 4400 and click Next. NOTE: The PowerEdge 4400 Diagnostics will test the PERC 2/DC in PowerEdge 6400 and 6450 systems, but it may not test other devices correctly. Use the PowerEdge 6400 or 6450 Diagnostics to test all other devices. 5. Scroll to the Server Diagnostics area and select all four diskettes. 6. Click Copy Files at the bottom of the screen and follow the instructions to create the four diagnostic diskettes. 7. Run the PowerEdge 4400 Diagnostics from the diskettes that were created above. 8. Choose Select Devices to Test in the main menu of the Dell Diagnostics. 9. Select PERC 2/DC in the Device Groups window. 10. Highlight Run tests in the taskbar along the bottom of the screen and press . 11. Highlight One in the taskbar and press . Information in this document is subject to change without notice. © 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A. Trademarks used in this text: Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.