Dell PowerEdge 6950 Hardware Owner's Manual (PDF) - Page 47
Closing the System,
View all Dell PowerEdge 6950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 3-3. Removing and Replacing the System Cover 1 2 3 1 latch 2 latch release lock 3 J hooks Closing the System 1 Lift up the latch on the cover. 2 Align the cover with the left and right edges of the system and offset it slightly towards the back of the system, so that the pins on the inner edge of the cover are aligned with the chassis J hooks. See Figure 3-3. 3 Lower the cover onto the chassis and close the latch. 4 Rotate the latch release lock in a clockwise direction to secure the cover. Installing System Components 47
Installing System Components
47
Figure 3-3.
Removing and Replacing the System Cover
Closing the System
1
Lift up the latch on the cover.
2
Align the cover with the left and right edges of the system and offset it slightly towards the back of the
system, so that the pins on the inner edge of the cover are aligned with the chassis J hooks. See
Figure 3-3.
3
Lower the cover onto the chassis and close the latch.
4
Rotate the latch release lock in a clockwise direction to secure the cover.
1
latch
2
latch release lock
3
J hooks
2
1
3