Dell PowerEdge C1100 Hardware Owner's Manual - Page 99
Troubleshooting a Wet System
View all Dell PowerEdge C1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Troubleshooting a Wet System CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 53. 3 Disassemble components from the system. See "Installing System Components" on page 47. • Cooling shroud • Hard drives • Backplane • Expansion-card riser • Power supplies • Fans • Processors and heat sinks • Memory modules 4 Let the system dry thoroughly for at least 24 hours. 5 Reinstall the components you removed in step 3. 6 Close the system. See "Closing the System" on page 54. 7 Reconnect the system to the electrical outlet, and turn on the system and attached peripherals. If the system does not start properly, see "Getting Help" on page 119. 8 If the system starts properly, shut down the system and reinstall all of the expansion cards that you removed. See "Installing the Expansion Card" on page 69. 9 If the system fails to start, see "Getting Help" on page 119. Troubleshooting Your System 99