Dell PowerEdge C5220 User Manual - Page 6
Align the end pieces of the rails on the vertical rack flanges to seat the pegs
View all Dell PowerEdge C5220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 Pull on the latch release buttons on the end piece midpoints to open the rail latches. 2 Align the end pieces of the rails on the vertical rack flanges to seat the pegs in the bottom hole of the first U and the top hole of the second U. Engage the back end of the rail until the latch locks in place. NOTE: The rails can be used in both square-hole and round-hole racks. Back Front 3 Repeat steps 1 to 2 to position and seat the front end piece on the vertical flange. NOTE: To remove the rails, pull on the latch release button on the end piece midpoint and unseat each rail. 4 Installation and Configuration
4
Installation and Configuration
1
Pull on the latch release buttons on the end piece midpoints to open the
rail latches.
2
Align the end pieces of the rails on the vertical rack flanges to seat the pegs
in the bottom hole of the first U and the top hole of the second U. Engage
the back end of the rail until the latch locks in place.
3
Repeat steps 1 to 2 to position and seat the front end piece on the vertical
flange.
NOTE:
The rails can be used in both square-hole and round-hole racks.
NOTE:
To remove the rails, pull on the latch release button on the end piece
midpoint and unseat each rail.
Front
Back