Dell PowerEdge M1000e Dell M8428-k Hardware Reference Manual - Page 17
Labeling, Transceivers - midplane
View all Dell PowerEdge M1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
FIGURE 2 Top view Hardware description 1 4 1 2 3 1 Switch module release lever 2 Release latch 3 Product label including serial number 4 Midplane connectors Labeling Figure 2 shows the labels appearing on the switch module. A second serial label is located beneath the release lever on the enclosure (visible only when the lever is extended). Transceivers NOTE You must install Dell-approved transceivers in the switch module. The converged network switch was designed to work with small form-factor pluggable (SFP) optical modules. The basic switch module ships with four 8 Gbps Dell-approved transceivers for the Fibre Channel ports. NOTE You can also install 4 Gbps transceivers in the FC ports of the switch module. All transceivers must be Dell-approved. Dell M8428-k Hardware Reference Manual 5 53-1001980-01