Dell PowerEdge M1000e Fabric OS Message Reference - Page 423

42 FW-1446 Recommended No action required, unless there are fewer than 4 power supplies active in the chassis. If there are Action fewer than 4, insert additional power supplies so that there are 4 active. Severity INFO FW-1446 Message , [FW-1446], ,, WARNING, , Four power supplies now required for 2X redundancy, not enforced by Fabric Watch due to Switch Status Policy overridden by User. Probable Cause Indicates that the switch now requires 4 power supplies for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no checking for switch status MARGINAL. The default values when an AP blade is or has been present are: 2 out of service indicates switch status is DOWN, 1 out of service indicates switch status is MARGINAL Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, 4 active power supplies should be supplied and the default values associated with the presence of an AP blade should be entered with switchStatusPolicyset command. Severity WARNING FW-1447 Message , [FW-1447], ,, WARNING, , Switch status change contributing factor Core Blade: Core blade failures (). Probable Cause Indicates that the switch is not in a healthy state. This occurred because the number of core blade failures is greater than or equal to the policy set by the switchStatusPolicySet command. Recommended Replace the faulty core blade. Action Severity WARNING FW-1500 Message , [FW-1500], ,, WARNING, , Mail overflow - Alerts being discarded. Probable Cause Indicates that mail alert overflow condition has occurred. Recommended Resolve or disable the mail alert using the fwMailCfg command. Action Severity WARNING Fabric OS Message Reference 347 53-1001767-01