Dell PowerEdge M420 Information Update - Support for PowerEdge C410x o - Page 2
Host Interface Card, C410x PCIe Expansion Chassis, Power Sequencing Requirements
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Host Interface Card Installation Instructions 1 Install the Dell X410 Host Interface Card (HIC) in an available x16 PCIe slot in the host. 2 Connect the Dell X410 HIC port to the C410x, with the provided cables. NOTE: For R710 systems, it is recommended that you install the optional x16 riser 2 to accommodate the HIC card and provide optimal bandwidth. NOTE: For information on Graphics Processing Unit (GPU) system configuration design, see Flexibility: The Dell Approach to HPC GPU Computing at HPCatDell.com. C410x PCIe Expansion Chassis For more information, see the C410x Hardware Owner's Manual at support.dell.com/manuals. NOTE: Due to limited system resources for PCIe devices, the C410x does not support the 8:1 mode in the M610x, R710, and R410 systems. Ensure that the C410x port configuration mode is set to either 2:1 or 4:1 mode. Power Sequencing Requirements To ensure proper operation with the host platform, follow specific power sequencing requirements. Turning on the Host 1 Turn on the C410x. NOTE: Wait for the GPU power button LED on the chassis to light. 2 Turn on the host. Rebooting the Host 1 Turn off the host. 2 Turn off the C410x. 3 Turn on the C410x. NOTE: Wait for the GPU power button LED on the chassis to light. 4 Turn on the host.