Dell PowerEdge M520 Hardware Owner's Manual - Page 20
Configuration Wizard, owerEdge M1000e Configuration, Guide, User's Guide - manual
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Configuration Wizard The CMC is preset for DHCP. To use a static IP address, you must toggle the CMC setting from DHCP to a static address by either running the LCD Configuration Wizard, or by using a management station and CLI commands. (For more information, see the PowerEdge M1000e Configuration Guide or CMC documentation.) NOTE: After you run the configuration wizard, this option is no longer available on the LCD menus. 1 Choose a language from the options presented in the dialog box. 2 Start the configuration wizard. 3 Configure the CMC network settings for your network environment: • Network speed • Duplex mode • Network mode (DHCP or static) • Static IP address, subnet mask, and gateway values (if static mode was selected) • DNS settings 4 If desired, configure the iDRAC network settings. See the CMC User's Guide for detailed information about the iDRAC. NOTE: The configuration wizard automatically configures each blade's iDRAC internal network interface if you do not choose to manually configure the iDRAC settings. NOTE: You cannot set a static IP address for the iDRAC using the LCD Configuration Wizard. To set a static IP address, use the CMC Web-based interface or RACADM. 5 Review the settings on the Network Summary screen. • If the settings are correct, press the center button to close the configuration wizard and return to the Main Menu. • If the settings are not correct, use the left arrow key to return to the screen for that setting and correct it. After you complete the configuration wizard, the CMC is available on your network. 20 About Your System